FLR Double Helical Sample Cooler
Part #: See Below for Full List
Get Started
Request A QuoteStill Have Questions?
Contact UsThe Sentry FLR sample cooler cools a sample from process streams. That may seem simple, but each FLR is a uniquely designed small tube in a shell heat exchanger.
The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then can be taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents.
-
Minimizes cooling water needs
-
Wide variety of exotic alloys available for corrosion resistance
-
Retained shellside gasket reduces reassembly time
-
Formed shell eliminates top shell flange weld interfaces
-
Mounting bracket can be installed without removing flange bolts
| Models | Shell Design | Tube Design | Tube Material | Shell Material | Part Number |
|---|---|---|---|---|---|
| FLR-6222 |
450 psi at 650°F
(31 bar at 343°C)
|
2000 psi at 1000°F (138 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953E |
| FLR-6222U | 300 psi at 650°F (21 bar at 343°C) |
2000 psi at 1000°F (138 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953F |
| FLR-6225 | 450 psi at 650°F (31 bar at 343°C) |
5000 psi at 1000°F (345 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953A |
| FLR-6225U | 300 psi at 650°F (21 bar at 343°C) |
4500 psi at 1000°F (310 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953B |
| FLR-6525(S) | 450 psi at 650°F (31 bar at 343°C) |
5000 psi at 1000°F (345 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
316/316L SS | 7-04480J |
| FLR-6525U(S) | 300 psi at 650°F (21 bar at 343°C) |
4500 psi at 1000°F (310 bar at 538°C) |
316/316L SS 3/8 in OD x 0.035 in AW |
316/316L SS | 7-04067N |
| FLR-62B3 | 450 psi at 650°F (31 bar at 343°C) |
3400 psi at 1100°F (234 bar at 593°C) |
Alloy 625 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953G |
| FLR-62B3U | 300 psi at 650°F (21 bar at 343°C) |
3400 psi at 1100°F (234 bar at 593°C) |
Alloy 625 3/8 in OD x 0.035 in AW |
304/304L SS | 7-03953H |
| FLR-6BB3 | 450 psi at 650°F (31 bar at 343°C) |
3400 psi at 1100°F (234 bar at 593°C) |
Alloy 625 3/8 in OD x 0.035 in AW |
Alloy 625 | 7-03953J |
| FLR-6BB3(S) | 450 psi at 650°F (31 bar at 343°C) |
3400 psi at 1100°F (234 bar at 593°C) |
Alloy 625 3/8 in OD x 0.035 in AW |
316/316L SS | 7-04981L |
Related Resources
Learn more about how the FLR Sample Cooler can benefit your application with the following resources.
.jpg?height=430&width=285&rmode=crop&ranchor=center&format=webp)
Spec Sheets
FLR Sample Cooler Spec Sheet
Instruction Manuals
Sentry Sample Cooler IOM
Marketing Materials
Keep it Cool with Sample Coolers
Technical Diagrams
Heat Exchanger Application GuideNeed Something Else?
Review some other related products that could help your current application.
FSR Single Helical Sample Cooler
FXR Double Helical Sample Cooler
TSR Single Helical Sample Cooler
WSW Single Helical Sample Cooler
