WSW Single Helical Sample Cooler
Part #: See Below for Full List
Get Started
Request A QuoteStill Have Questions?
Contact UsThe Sentry WSW tube sample cooler cools a sample from a process stream. That may seem simple, but each WSW is a uniquely designed small tube in a shell heat exchanger.
The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then can be taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents.
-
Minimizes cooling water needs with its helical coil design
-
Supports low pressure drops
-
Easy to maintain due to it's fully drainable coil
| Models | Shell Design | Tube Design | Tube Material | Shell Material | Part Number |
|---|---|---|---|---|---|
| WSW-8222 |
400 psi at 350°F
(27 bar at 177°C)
|
1200 psi at 650°F (82 bar at 343°C) |
316/316L SS 1/2 in OD x 0.049 in AW |
304 SS | 7-00712A |
| WSW-8222U |
400 psi at 350°F
(27 bar at 177°C)
|
1200 psi at 650°F (82 bar at 343°C) |
316/316L SS 1/2 in OD x 0.049 in AW |
304 SS | 7-00712G |
Related Resources
Learn more about how the WSW Sample Cooler can benefit your application with the following resources.
Spec Sheets
WSW Sample Cooler Spec Sheet
Instruction Manuals
Sentry Sample Cooler IOM
Marketing Materials
Keep it Cool with Sample Coolers
Technical Diagrams
Heat Exchanger Application GuideNeed Something Else?
Review some other related products that could help your current application.
W9000 Series Sample Cooler
TSR Single Helical Sample Cooler
FSR Single Helical Sample Cooler
FXR Double Helical Sample Cooler
